EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE

Blog Article

The EPEVER Tracer AN Series Photo voltaic Demand Controller is usually a remarkably effective photo voltaic controller made for off-grid photo voltaic methods. Determined by multiphase synchronous rectification engineering, it makes sure optimized energy conversion and program steadiness for a variety of photovoltaic (PV) purposes.

Crucial Characteristics with the EPEVER Tracer AN Collection Controller
The Tracer AN sequence utilizes EPEVER Solar Demand Controller technologies for exceptional photo voltaic Electrical power harvesting. Important functions involve:

Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Advanced MPPT Algorithm with >99% performance.
Twin-Stage Charging for enhanced battery existence.
LCD Exhibit with real-time data checking.
Many Load Manage Modes such as manual and timer.
Extensive Digital Protections towards overcharging, in excess of-discharging, quick circuits, and reverse polarity.
Action-by-Move Manual to Setting Up the EPEVER Tracer AN Series Controller
one. Unboxing and Preparing the Controller
Make certain all elements are incorporated: Tracer AN unit, temperature sensor, communication cables, and user handbook.
Confirm the product selection and voltage scores match your photo voltaic panel and battery specifications.
2. Mounting the Charge Controller
Decide on a properly-ventilated, dry spot near to the battery bank.
Secure the Tracer AN controller using the provided mounting brackets.
Retain suitable clearance for heat dissipation.
3. Wiring the Photo voltaic Charge Controller
Warning: Generally abide by good protection protocols and ensure the program is run off ahead of connecting parts.

Move one: Hook up the battery terminals on the charge controller (positive visit here to favourable, damaging to unfavorable).
Step two: Hook up the photo voltaic panel array towards the PV input terminals.
Stage 3: Connect the load terminals if utilizing a immediate load link.
Stage 4: Double-Look at all connections for polarity and tightness.
four. Configuring the Controller Options
Electrical power on the controller by connecting the battery to start with.
Make use of the LCD Exhibit to navigate the options menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Manual, timer, light-weight Command.
5. Monitoring and Details Logging
The Tracer AN Sequence supports actual-time checking utilizing the MT50 distant meter.
Data can be logged by using the RS485 conversation port utilizing computer software like Photo voltaic Station Personal computer.
Distant checking is achievable Using the EPEVER WiFi module.
six. Troubleshooting Prevalent Concerns
Situation 1: No Electricity Output

Verify battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Situation 2: About-Voltage Safety

Validate the solar array’s voltage rating.
Change system parameters if vital.
Problem three: No Battery Charging

Inspect PV wiring for continuity.
Verify MPPT configurations in the menu.
Advantages of the Tracer AN Collection with MSR Know-how
The multiphase synchronous rectification engineering assures:

Bigger Efficiency: Lessened Strength losses for the duration of conversion.
Enhanced Reliability: Steady effectiveness underneath variable hundreds.
Lengthier Battery Lifetime: Consistent and accurate charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification technology is undoubtedly an Fantastic option for optimizing solar energy era and increasing battery existence. By adhering to the above mentioned set up guideline, buyers can make certain most performance and process longevity.