EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Collection Solar Demand Controller is usually a highly efficient solar controller created for off-grid photo voltaic techniques. Determined by multiphase synchronous rectification technologies, it makes sure optimized Strength conversion and technique steadiness for an array of photovoltaic (PV) programs.
Vital Functions on the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Solar Cost Controller engineering for excellent photo voltaic Strength harvesting. Essential capabilities include things like:
Multiphase Synchronous Rectification (MSR) for enhanced Electricity conversion.
State-of-the-art MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Improved battery daily life.
Liquid crystal display Exhibit with true-time facts checking.
Multiple Load Management Modes which include handbook and timer.
Complete Digital Protections in opposition to overcharging, in excess of-discharging, limited circuits, and reverse polarity.
Phase-by-Stage Guideline to Putting together the EPEVER Tracer AN Sequence Controller
1. Unboxing and Getting ready the Controller
Make certain all factors are bundled: Tracer AN unit, temperature sensor, interaction cables, and consumer manual.
Validate the product number and voltage ratings match your solar panel and battery technical specs.
two. Mounting the Charge Controller
Select a perfectly-ventilated, dry spot near to the battery bank.
Protected the Tracer AN controller utilizing the supplied mounting brackets.
Maintain proper clearance for heat dissipation.
three. Wiring the Solar Cost Controller
Caution: Constantly observe proper protection protocols and make sure the method is driven off ahead of connecting parts.
Stage one: Hook up the battery terminals for the charge controller (positive to beneficial, adverse to damaging).
Step two: Link the solar panel array to your PV input terminals.
Step three: Link the load terminals if using a immediate load link.
Step four: Double-Examine all connections for polarity and tightness.
four. Configuring the Controller Options
Electrical power around the controller by connecting the battery to start with.
Use the LCD Exhibit to navigate the settings menu.
Configure:
Battery Style: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Guide, timer, light-weight control.
five. Monitoring and Facts Logging
The Tracer AN Sequence supports real-time checking using the MT50 distant meter.
Information is usually logged through the RS485 communication port working with computer software such as Photo voltaic Station PC.
Distant monitoring is achievable While using the EPEVER WiFi module.
six. Troubleshooting Typical Challenges
Concern 1: No Ability Output
Examine battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Concern two: Above-Voltage Security
Verify the photo voltaic array’s voltage rating.
Change method parameters if important.
Problem three: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options in the menu.
Advantages of the Tracer AN Series with MSR Technological innovation
The multiphase synchronous rectification technology makes certain:
Bigger Efficiency: Lessened Vitality losses during conversion.
Enhanced Reliability: Secure efficiency less than Click Here variable loads.
For a longer time Battery Everyday living: Regular and exact charging profiles.
Conclusion
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification technological innovation is an Excellent option for optimizing solar power era and increasing battery life. By adhering to the above mentioned set up guidebook, people can ensure highest effectiveness and procedure longevity.